I have some problems with two different types AUTOCOMS CDP+. PCB was different type and both have a problems with message VCI not found. They both using same procesor STM32F205ZGT6 same shematic but different layout. Autocom with 2 PCB (main pcb + relay pcb) is better quality from autocom with only one double layer PCB. The second one has already printed test points to make connections to upgrade firmware.
We share free download link for 2014.R2 autocom CDP / delphi DS150E d Autocom/Delphi 2014R2 + Autocom 2014. Autocom CDP +Bluetooth 2016 Autocom CDP +Bluetooth 2015.3. If you have such a motherboard, you can use the drivers. Xian Ajuste para Bluetooth AUTOCOM CDP Pro Herramientas Cable USB + 8 Piezas OBD2 Cable de Coche.
Drivers Installer for Auto-com CDP+ USB. If you don't want to waste time on hunting after the needed driver for your PC, feel free to use a dedicated self-acting installer. It will select only qualified and updated drivers for all hardware parts all alone. To download SCI Drivers Installer, follow this link. Delphi DS150E new design for limited space applications. Configuracion drivers delphi ds150e windows 10 autocom cdp + usb - Duration, 2, 32. It's actually a different question than that. When I just close the app, change the Windows scaling and start the app again, erInch remains the same. Multi-language and full year 2019 results above prior.
To repair your broken Autocom with this kind of processor is really easy only you need:
– wires
– solder iron
– Flash_Loader_Demonstrator
– firmware
– some electronic skiils
Procedures:
1.Install Flash_Loader_Demonstrator
2.make wire connection between VDD (pin1 from J400) and pin138 BOOT0 from STM32F20XXX – for Autocom pcb V 3.0 or between TP102 (VDD) and TP206 – for Autocom class B
Command and conquer 3 patch 1.0. 3.put a switch between pin9 and pin10 from J400 (this connection is needed to join short time NRST to GND – make resset)
Autocom Cdp Usb
4.connect Autocom to car (or external 12v) and USB to computer
5.start Flash_Loader_Demonstrator and dont change anything in settings just select yout VCI port number
6.connection wire is between VDD and BOOT0 (step2) all time while upgrating firmware
7.After Flash_Loader_Demonstrator window is appear then made short connection between pin 9 and pin 10 from J400 (look at pictures)
8.If everything is OK then next window will be avaliable in Flash Loader Demonstrator
9.When connection with MCU is avaliable, you need choose type of MCU 1024K
10.Select your firmware ex. 2012.3.bin from download to device option and global erase
11.Click next and wait about 7 min for uploading your firmware to Autocom
12.After uploading firmware finished just disconect Autocom from OBD2 and USB and connect it again and make test and you will be suprised your Autocom is live again
Autocom Usb Driver
All files and documentation is here
I hope this post was helpfull for all people having problems with Autocom chinese clones.
Readers who read this article also read:
